
J-series · Model J1
26 ft Solar Panel Cleaning Tractor (50 HP)
The 26 ft solar panel cleaning tractor carries the longest brush in the range. It is meant for wide tables and structures where a 15 ft brush would need two passes, so fewer passes are needed per block.
- 50 HP
- 26 ft brush
- About 0.4 MW/hour
Price on request, configured to your array
Best for
Where this model fits
- Wide tables and two-module-high portrait layouts
- Large plants where cutting the number of passes matters
- Fleets standardising on a 50 HP tractor
- 50 HP
- Tractor power
- 26 ft
- Brush length
- 0.4 MW/h
- Cleaning output (approx.)
- 4,000 L/MW
- Water use (approx.)
Specifications
26 ft Solar Panel Cleaning Tractor (50 HP) specifications
| Specification | Value |
|---|---|
| Model | J1 |
| Tractor power | 50 HP |
| Brush length | 26 ft |
| Operation | Automatic hydraulic brush drive |
| Hydraulic flow | 106 LPM |
| Hydraulic oil tank | 150 litres |
| Hydraulic jacks | 4 |
| Control valves | 2 × 3-spool directional |
| Check valves | 3 |
| Brush diameter | 14 in |
| Brush type | Spiral, soft bristle |
| Cleaning output | About 0.4 MW per hour |
| Panels per hour | 1,250–1,500 (approx. 7.5 × 3.25 ft modules) |
| Water use | About 4,000 litres per MW |
| Water tank | 1,000 litres, rear pallet-fork frame |
| Panel height range | 1–10 ft |
| Table width covered | 6.5–23 ft |
| Working speed | 0.25–2 km/h |
| Working side | Either side of the tractor |
| Boom swivel | Up to 120° |
| Brush head movement | Up to 270° |
| Front setup weight | 816 kg |
| Rear setup weight | 830 kg |
| Fuel tank | 60 litres |
| Battery | 88 Ah, 12 V |
| Service hose | 10 m |
Values from the J-series specification sheet. Final configuration is confirmed in your quotation.
Features
Built for daily work on solar plants
Fits without modifying the tractor
The system bolts on with an external mounting frame, so the tractor is not cut or welded. All brush and boom movements run on hydraulics.
120° swivel boom
A centre pivot lets the boom swing up to 120°, so the operator can clean rows on either side of the tractor.
Self-levelling brush head
The brush hangs from a free pivot and follows the tilt of the table and dips in the track. No resetting between rows.
Water-assisted cleaning
A 1,000-litre tank rides on the rear frame. Plain water is sprayed at the brush, with no detergents on the glass.
Operator-side hydraulic controls
Labelled hydraulic levers sit next to the operator, with direction marked for every function.
Folds for road transport
The boom folds hydraulically along the right side of the tractor and locks for stable transport between blocks.
Lighting for night shifts
Two front focus lights, four roof LEDs, an under-chassis lamp and a cabin light for cleaning before sunrise or after sunset.
10 m service hose
A hose from the onboard pump handles spot washing, and the same supply can wash down the tractor after a shift.
Choosing the 26 ft Solar Panel Cleaning Tractor (50 HP)
A 26 ft brush for wide tables and double-row structures, on a 50 HP tractor. A 26 ft brush covers wider tables in a single pass, which reduces the number of passes per block. Check the folded length against your internal roads and gates.
What comes with the system
- Hydraulic swivel boom with centre pivot (up to 120°) and operator-side controls
- 14 in spiral soft-bristle brush on a free-pivoting head
- Water spray at the brush, fed from a 1,000-litre tank on a rear pallet-fork frame
- 10 m service hose for spot washing and rinsing the brush
- Lighting kit: two front focus lights, four roof LEDs, an under-chassis lamp and a cabin light
Before you order
Send us your table width, the lowest and highest panel edge, row spacing, internal road width and water source. Tell us whether you need the tractor or will use your own, with its make, model and HP. We use these details to confirm the configuration in your quotation.
Every machine is installed on site, and we train your operators before handover. Spare brushes, hoses and seals are available, and an annual maintenance contract is optional. See service and support or use the cleaning planner to estimate cycle time and water for your plant.
FAQs
Questions about this model
When should I choose a 26 ft brush over a 15 ft brush?
Choose 26 ft when your table width is more than about 15 ft, so the brush covers it in one pass. For narrower tables, a 15 ft brush is easier to manoeuvre.
Is a longer brush harder to transport?
The boom folds hydraulically along the right side of the tractor. Check the folded length against your internal roads and gates; we can confirm it for your site.
Does it use more water than the 15 ft model?
Water use is set by the area cleaned, about 4,000 litres per MW, not by the brush length.
Compare
Other models

35 HP · 15 ft brush · grass cutter
35 HP Solar Panel Cleaning Tractor with Grass Cutter
The J2: a 15 ft brush and a grass cutter on a 35 HP tractor.
View specifications
50 HP · 15 ft brush
Tractor-Mounted Solar Module Cleaning Machine (15 ft brush)
The standard J1 set-up: a 15 ft spiral brush on a 120° swivel boom, run from a 50 HP tractor.
View specifications
50 HP · 26 ft brush · grass cutter
26 ft Solar Panel Cleaning Tractor with Grass Cutter
A 26 ft brush plus a grass-cutting attachment for vegetation between rows.
View specificationsTalk to an engineer
Is this the right model for your plant?
Send your table width, plant size and tractor details. We will confirm the fit and send a quotation.
