Skip to content

Tractor-mounted solar panel cleaning systems · Chennai, India

35 HP Solar Panel Cleaning Tractor with Grass Cutter
Representative photo of a J-series cleaning system

J-series · Model J2

35 HP Solar Panel Cleaning Tractor with Grass Cutter

The J2 puts a 15 ft cleaning brush and a grass cutter on a 35 HP tractor. One operator can clean the modules and keep vegetation down in the same round, which helps on sites where both jobs are due at the same time.

  • 35 HP
  • 15 ft brush
  • Grass cutter
  • About 0.4 MW/hour

Price on request, configured to your array

Best for

Where this model fits

  • Mid-size plants with grass growth between rows
  • O&M contractors pricing cleaning and vegetation together
  • Sites with standard table widths
35 HP
Tractor power
15 ft
Brush length
0.4 MW/h
Cleaning output (approx.)
4,000 L/MW
Water use (approx.)

Specifications

35 HP Solar Panel Cleaning Tractor with Grass Cutter specifications

Specifications
SpecificationValue
ModelJ2
Tractor power35 HP
Brush length15 ft
Grass cutterIncluded
OperationAutomatic hydraulic brush drive
Hydraulic flow106 LPM
Hydraulic oil tank150 litres
Hydraulic jacks4
Control valves2 × 3-spool directional
Check valves3
Brush diameter14 in
Brush typeSpiral, soft bristle
Cleaning outputAbout 0.4 MW per hour
Panels per hour1,250–1,500 (approx. 7.5 × 3.25 ft modules)
Water useAbout 4,000 litres per MW
Water tank1,000 litres, rear pallet-fork frame
Panel height range1–10 ft
Table width covered6.5–23 ft
Working speed0.25–2 km/h
Working sideEither side of the tractor
Boom swivelUp to 120°
Brush head movementUp to 270°
Front setup weight816 kg
Rear setup weight830 kg
Fuel tank60 litres
Battery88 Ah, 12 V
Service hose10 m

Values from the J-series specification sheet. Final configuration is confirmed in your quotation.

Features

Built for daily work on solar plants

Fits without modifying the tractor

The system bolts on with an external mounting frame, so the tractor is not cut or welded. All brush and boom movements run on hydraulics.

120° swivel boom

A centre pivot lets the boom swing up to 120°, so the operator can clean rows on either side of the tractor.

Self-levelling brush head

The brush hangs from a free pivot and follows the tilt of the table and dips in the track. No resetting between rows.

Water-assisted cleaning

A 1,000-litre tank rides on the rear frame. Plain water is sprayed at the brush, with no detergents on the glass.

Operator-side hydraulic controls

Labelled hydraulic levers sit next to the operator, with direction marked for every function.

Folds for road transport

The boom folds hydraulically along the right side of the tractor and locks for stable transport between blocks.

Lighting for night shifts

Two front focus lights, four roof LEDs, an under-chassis lamp and a cabin light for cleaning before sunrise or after sunset.

10 m service hose

A hose from the onboard pump handles spot washing, and the same supply can wash down the tractor after a shift.

Choosing the 35 HP Solar Panel Cleaning Tractor with Grass Cutter

The J2: a 15 ft brush and a grass cutter on a 35 HP tractor. A 15 ft brush covers tables up to about 15 ft wide in one pass and is easy to manoeuvre at row ends and on narrow headlands.

The grass cutter lets the same tractor and operator deal with vegetation between rows on the cleaning round. Tall grass shades the lower edge of modules and hides cables and stones, so cutting it on the same visit saves a separate crew.

What comes with the system

  • Hydraulic swivel boom with centre pivot (up to 120°) and operator-side controls
  • 14 in spiral soft-bristle brush on a free-pivoting head
  • Water spray at the brush, fed from a 1,000-litre tank on a rear pallet-fork frame
  • 10 m service hose for spot washing and rinsing the brush
  • Lighting kit: two front focus lights, four roof LEDs, an under-chassis lamp and a cabin light
  • Grass-cutting attachment

Before you order

Send us your table width, the lowest and highest panel edge, row spacing, internal road width and water source. Tell us whether you need the tractor or will use your own, with its make, model and HP. We use these details to confirm the configuration in your quotation.

Every machine is installed on site, and we train your operators before handover. Spare brushes, hoses and seals are available, and an annual maintenance contract is optional. See service and support or use the cleaning planner to estimate cycle time and water for your plant.

FAQs

Questions about this model

What does the grass cutter add?

It lets the same tractor cut the vegetation between rows on its cleaning round, so grass does not shade the lower module edge.

Which brush length does the J2 use?

A 15 ft spiral soft-bristle brush, 14 in in diameter.

Is training included?

We train your operators at handover. See Services for installation, training and maintenance support.

Compare

Other models

Compare all models

Talk to an engineer

Is this the right model for your plant?

Send your table width, plant size and tractor details. We will confirm the fit and send a quotation.

Call WhatsApp Get a quote