Skip to content

Tractor-mounted solar panel cleaning systems · Chennai, India

FAQs

Solar panel cleaning tractor FAQs

Straight answers about fit, cleaning, water and support. Can’t find yours? Ask us.

Machines and fit

Choosing and fitting the system

What is a solar panel cleaning tractor?

It is a tractor fitted with a hydraulic boom and a rotating soft-bristle brush. The operator drives along the row while the brush and a water spray clean the modules, so one person can clean far more panels per shift than a manual crew.

Which tractors can carry the system?

Our J-series models are set up for 30, 35, 45, 50 and 75 HP tractors. The system mounts externally, so the tractor is not cut or welded. Send us the make, model and HP and we will confirm the fit.

Do you supply the tractor as well?

Tell us what you need. We can quote the cleaning system for your existing tractor or discuss a complete unit.

Which brush length should I choose?

Match the brush to your table width. A 15 ft brush covers tables up to about 15 ft wide in one pass, and a 26 ft brush covers wider tables. Brush lengths from 10 ft upwards are made to suit the array.

What panel heights can it clean?

The J-series spec sheet lists a panel height range of 1 to 10 ft, with table widths from 6.5 to 23 ft.

Can it clean panels on single-axis trackers?

The free-pivoting brush follows the panel angle, which helps on trackers. Share your tracker make and stow angle so we can confirm clearance before you order.

Cleaning and water

Cleaning performance and panel care

How much water does a cleaning tractor use?

Plan on about 4,000 litres per MW cleaned, from the J-series spec sheet. The 1,000-litre tank on the rear frame covers roughly 0.25 MW per fill.

Can it clean without water?

Light, loose dust can be brushed dry. Water is recommended for bird droppings, pollen and caked soiling, and gives a more even finish.

How fast does it clean?

The spec sheet lists about 0.4 MW per hour at a working speed of 0.25–2 km/h. Real output depends on row length, turning space and how dirty the panels are.

Will the brush scratch the glass?

The brush is a spiral, soft-bristle design made for smooth PV glass, and the free-pivoting head stops it pressing into the modules. Use clean water and keep the brush free of grit.

When is the best time to clean?

Early morning or late evening, when generation is low and the glass is cool. The lighting kit also allows night shifts, which avoids thermal shock from cold water on hot modules.

How often should a solar plant be cleaned?

It depends on dust, rainfall and bird activity. Many plants in dusty regions clean every two to four weeks in the dry season. Use the cleaning planner to see what a cycle takes with your plant size.

Buying and support

Quotes, installation and service

Do you install the system and train our operators?

Yes. We install and commission the system on site and train your operators on driving, boom handling, water settings and daily checks.

Do you offer maintenance contracts?

Yes. Annual maintenance contracts cover scheduled inspections, brush and hose checks and hydraulic servicing.

Are spare brushes and parts available?

Yes. We supply spare brushes, hoses, seals and other wear parts for our systems.

Where do you deliver?

We are based in Chennai and supply solar plants across India. Tell us the site location when you ask for a quote.

How do I get a price?

Send your plant size, table width, panel height and tractor details through the quote form. We reply with a configuration and quotation.

Can you build a custom configuration?

Yes. Brush length, grass-cutter add-on and mounting can be configured to suit your array and tractor.

Talk to an engineer

Still have a question?

Call us or send a message and our team will get back to you.

Call WhatsApp Get a quote