
J-series
15 ft Solar Panel Cleaning Tractor Brush with Grass Cutter
This is the 15 ft brush system with a grass cutter, configured for the tractor you use. It is a good fit when you already have a suitable tractor and want to add cleaning and vegetation control to it.
- To suit your tractor
- 15 ft brush
- Grass cutter
- About 0.4 MW/hour
Price on request, configured to your array
Best for
Where this model fits
- Owners who already run a suitable tractor
- Standard table widths up to about 15 ft
- Sites that want cleaning and grass cutting from one unit
- To suit your tractor
- Tractor power
- 15 ft
- Brush length
- 0.4 MW/h
- Cleaning output (approx.)
- 4,000 L/MW
- Water use (approx.)
Specifications
15 ft Solar Panel Cleaning Tractor Brush with Grass Cutter specifications
| Specification | Value |
|---|---|
| Model | J-series |
| Tractor power | To suit your tractor |
| Brush length | 15 ft |
| Grass cutter | Included |
| Operation | Automatic hydraulic brush drive |
| Hydraulic flow | 106 LPM |
| Hydraulic oil tank | 150 litres |
| Hydraulic jacks | 4 |
| Control valves | 2 × 3-spool directional |
| Check valves | 3 |
| Brush diameter | 14 in |
| Brush type | Spiral, soft bristle |
| Cleaning output | About 0.4 MW per hour |
| Panels per hour | 1,250–1,500 (approx. 7.5 × 3.25 ft modules) |
| Water use | About 4,000 litres per MW |
| Water tank | 1,000 litres, rear pallet-fork frame |
| Panel height range | 1–10 ft |
| Table width covered | 6.5–23 ft |
| Working speed | 0.25–2 km/h |
| Working side | Either side of the tractor |
| Boom swivel | Up to 120° |
| Brush head movement | Up to 270° |
| Front setup weight | 816 kg |
| Rear setup weight | 830 kg |
| Fuel tank | 60 litres |
| Battery | 88 Ah, 12 V |
| Service hose | 10 m |
Values from the J-series specification sheet. Final configuration is confirmed in your quotation.
Features
Built for daily work on solar plants
Fits without modifying the tractor
The system bolts on with an external mounting frame, so the tractor is not cut or welded. All brush and boom movements run on hydraulics.
120° swivel boom
A centre pivot lets the boom swing up to 120°, so the operator can clean rows on either side of the tractor.
Self-levelling brush head
The brush hangs from a free pivot and follows the tilt of the table and dips in the track. No resetting between rows.
Water-assisted cleaning
A 1,000-litre tank rides on the rear frame. Plain water is sprayed at the brush, with no detergents on the glass.
Operator-side hydraulic controls
Labelled hydraulic levers sit next to the operator, with direction marked for every function.
Folds for road transport
The boom folds hydraulically along the right side of the tractor and locks for stable transport between blocks.
Lighting for night shifts
Two front focus lights, four roof LEDs, an under-chassis lamp and a cabin light for cleaning before sunrise or after sunset.
10 m service hose
A hose from the onboard pump handles spot washing, and the same supply can wash down the tractor after a shift.
Choosing the 15 ft Solar Panel Cleaning Tractor Brush with Grass Cutter
A 15 ft cleaning brush with grass cutter, set up for the tractor you specify. A 15 ft brush covers tables up to about 15 ft wide in one pass and is easy to manoeuvre at row ends and on narrow headlands.
The grass cutter lets the same tractor and operator deal with vegetation between rows on the cleaning round. Tall grass shades the lower edge of modules and hides cables and stones, so cutting it on the same visit saves a separate crew.
What comes with the system
- Hydraulic swivel boom with centre pivot (up to 120°) and operator-side controls
- 14 in spiral soft-bristle brush on a free-pivoting head
- Water spray at the brush, fed from a 1,000-litre tank on a rear pallet-fork frame
- 10 m service hose for spot washing and rinsing the brush
- Lighting kit: two front focus lights, four roof LEDs, an under-chassis lamp and a cabin light
- Grass-cutting attachment
Before you order
Send us your table width, the lowest and highest panel edge, row spacing, internal road width and water source. Tell us whether you need the tractor or will use your own, with its make, model and HP. We use these details to confirm the configuration in your quotation.
Every machine is installed on site, and we train your operators before handover. Spare brushes, hoses and seals are available, and an annual maintenance contract is optional. See service and support or use the cleaning planner to estimate cycle time and water for your plant.
FAQs
Questions about this model
Can this be fitted to my existing tractor?
That is the idea of this model. Share the tractor make, model, HP and hydraulic details and we will confirm the fit.
Does fitting the system modify the tractor?
No. The system uses an external mounting frame, so the tractor is not cut or welded.
What brush is fitted?
A 15 ft spiral soft-bristle brush, 14 in in diameter, on a free-pivoting head.
Compare
Other models

50 HP · 26 ft brush
26 ft Solar Panel Cleaning Tractor (50 HP)
A 26 ft brush for wide tables and double-row structures, on a 50 HP tractor.
View specifications
75 HP · 26 ft brush
75 HP Solar Panel Cleaning Tractor (26 ft brush)
The heavy-duty option: a 26 ft brush with the headroom of a 75 HP tractor.
View specifications
30 HP · 15 ft brush
30 HP Solar Panel Cleaning Tractor
The J3: the compact option, with a 15 ft brush on a 30 HP tractor.
View specificationsTalk to an engineer
Is this the right model for your plant?
Send your table width, plant size and tractor details. We will confirm the fit and send a quotation.
