Skip to content

Tractor-mounted solar panel cleaning systems · Chennai, India

Brush and boom system

Solar panel cleaning tractor brush and boom

The brush is the part that touches your modules. Ours is a 14 in spiral, soft-bristle brush on a free-pivoting head, carried by a hydraulic boom that swings up to 120° to either side.

The brush

Soft on the glass, firm on the dirt

The spiral bristle pattern sweeps dust and loosened soil off the module as it turns, instead of pushing it along the glass. Soft bristles are made for smooth PV glass and its anti-reflective coating.

  • 14 in diameter spiral brush
  • Soft bristles designed for PV glass
  • Standard lengths of 15 ft and 26 ft; other lengths from 10 ft made to suit the array
  • Replaceable brush, with spares available
PV module cleaning with a rotating brush and water

The boom

Reaches the row and follows the panel

120° swivel

The boom pivots from a central point, so the operator can clean the rows on either side of the tractor path.

Free-pivoting head

The brush hangs from a free pivot and settles at the panel angle. It also absorbs dips in the track, with no resetting between rows.

Up to 270° head movement

The head moves through up to 270°, covering flat, steep and tilted tables.

Folds for transport

The hydraulic boom folds along the right side of the tractor and locks for road travel between blocks.

Sizing

Choosing a brush length

Table width Brush Models
Up to about 15 ft 15 ft 30 HP, 35 HP + cutter, 45 HP, 50 HP, 15 ft + cutter
Wider than 15 ft (up to 23 ft covered) 26 ft 45 HP, 50 HP, 26 ft + cutter, 75 HP
Non-standard layouts 10 ft upwards, made to suit Ask us

Covered table widths of 6.5–23 ft and panel heights of 1–10 ft are from the J-series specification. Send your drawings and we will confirm the fit.

Brush care

Keep the brush clean and the glass safe

  1. 1

    Rinse after every shift

    Wash grit and sand out of the bristles with the 10 m service hose before parking.

  2. 2

    Check bristle wear weekly

    Look for flattened or uneven bristles and replace the brush before it stops sweeping evenly.

  3. 3

    Use clean water

    Water with sand or high mineral content can leave marks. Filter it if your source is muddy.

  4. 4

    Never press the brush down

    Let the free-pivoting head rest at its own weight. Extra pressure does not clean better.

Spare brushes

We supply replacement brushes in the length your machine uses, along with hoses, seals and other wear parts.

Ask about spares

FAQs

Brush questions

Will the brush scratch the glass?

The brush is a spiral, soft-bristle design made for smooth PV glass, and the free-pivoting head stops it pressing into the modules. Use clean water and keep the brush free of grit.

Which brush length should I choose?

Match the brush to your table width. A 15 ft brush covers tables up to about 15 ft wide in one pass, and a 26 ft brush covers wider tables. Brush lengths from 10 ft upwards are made to suit the array.

How often does the brush need replacing?

It depends on hours of use, soiling and water quality. Check bristle wear weekly and replace the brush when it no longer sweeps evenly. We can advise based on your schedule.

Can I fit a longer brush to my existing machine?

Possibly, but a longer brush changes the load on the boom and the tractor hydraulics. Ask us to check before you change it.

Talk to an engineer

Need a brush for a non-standard array?

Send your table drawings and tractor details. We will propose a length and mounting.

Call WhatsApp Get a quote