Skip to content

Tractor-mounted solar panel cleaning systems · Chennai, India

J-series

Solar panel cleaning tractor models

Nine configurations built on one proven system: a hydraulic swivel boom, a soft-bristle spiral brush and water-assisted cleaning. Choose by tractor power, brush length and whether you need a grass cutter.

All models

Find your configuration

Compare

Models at a glance

Every model shares the J-series hydraulics, brush and water system listed below.

Selection guide

Which model fits your plant?

Start with your table width, then match the tractor class to your terrain and shift length.

If you have… Consider
Tables up to about 15 ft wide 15 ft brush: 30, 35, 45 or 50 HP
Tables wider than 15 ft 26 ft brush: 45, 50 or 75 HP
Grass between rows A grass-cutter model: 35 HP, 15 ft or 26 ft
Small plant or tight turning space 30 HP J3 compact model
Long shifts, sandy or rough tracks 75 HP with 26 ft brush
You already own a suitable tractor 15 ft brush with grass cutter, fitted to your tractor

Send us these five details

  • Plant size in MW and number of blocks
  • Table width and lowest/highest panel edge
  • Row spacing and internal road width
  • Tractor make, model and HP (if you have one)
  • Water source and quality on site

Request a configuration

Common specification

Shared by every J-series model

Specification Value
Operation Automatic hydraulic brush drive
Hydraulic flow 106 LPM
Hydraulic oil tank 150 litres
Hydraulic jacks 4
Control valves 2 × 3-spool directional
Check valves 3
Brush diameter 14 in
Brush type Spiral, soft bristle
Cleaning output About 0.4 MW per hour
Panels per hour 1,250–1,500 (approx. 7.5 × 3.25 ft modules)
Water use About 4,000 litres per MW
Water tank 1,000 litres, rear pallet-fork frame
Panel height range 1–10 ft
Table width covered 6.5–23 ft
Working speed 0.25–2 km/h
Working side Either side of the tractor
Boom swivel Up to 120°
Brush head movement Up to 270°
Front setup weight 816 kg
Rear setup weight 830 kg
Fuel tank 60 litres
Battery 88 Ah, 12 V
Service hose 10 m

Features

Designed around how plants are really cleaned

Fits without modifying the tractor

The system bolts on with an external mounting frame, so the tractor is not cut or welded. All brush and boom movements run on hydraulics.

120° swivel boom

A centre pivot lets the boom swing up to 120°, so the operator can clean rows on either side of the tractor.

Self-levelling brush head

The brush hangs from a free pivot and follows the tilt of the table and dips in the track. No resetting between rows.

Water-assisted cleaning

A 1,000-litre tank rides on the rear frame. Plain water is sprayed at the brush, with no detergents on the glass.

Operator-side hydraulic controls

Labelled hydraulic levers sit next to the operator, with direction marked for every function.

Folds for road transport

The boom folds hydraulically along the right side of the tractor and locks for stable transport between blocks.

Lighting for night shifts

Two front focus lights, four roof LEDs, an under-chassis lamp and a cabin light for cleaning before sunrise or after sunset.

10 m service hose

A hose from the onboard pump handles spot washing, and the same supply can wash down the tractor after a shift.

FAQs

Questions about choosing a model

Which tractors can carry the system?

Our J-series models are set up for 30, 35, 45, 50 and 75 HP tractors. The system mounts externally, so the tractor is not cut or welded. Send us the make, model and HP and we will confirm the fit.

Do you supply the tractor as well?

Tell us what you need. We can quote the cleaning system for your existing tractor or discuss a complete unit.

Which brush length should I choose?

Match the brush to your table width. A 15 ft brush covers tables up to about 15 ft wide in one pass, and a 26 ft brush covers wider tables. Brush lengths from 10 ft upwards are made to suit the array.

What panel heights can it clean?

The J-series spec sheet lists a panel height range of 1 to 10 ft, with table widths from 6.5 to 23 ft.

How fast does it clean?

The spec sheet lists about 0.4 MW per hour at a working speed of 0.25–2 km/h. Real output depends on row length, turning space and how dirty the panels are.

Talk to an engineer

Not sure which model to choose?

Send your table width, plant size and tractor details. We will recommend a configuration.

Call WhatsApp Get a quote